AiM Exhaust Gas Thermocouple Temperature Sensor M5 K Type
Description
AiM Exhaust Gas Thermocouple Temperature Sensor M5 K Type
The AiM Exhaust Gas Temperature Sensor (EGT) can measure the exhaust gas temperature by being placed in the exhaust header pipe.
Key Features :
| Measure exhaust gas temperature | Thermocouple male fitting |
| Wide temperature range |
AiM Exhaust Gas Thermocouple Temperature Sensor M5 K Type
The AiM K Type thermocouple temperature sensor is fitted with a two pins male thermocouple connection.
It can measure the exhaust gas temperature by being placed in the exhaust header pipe around 150mm from the exhaust pipe.
Temperature range of 0-1000°C
Sensor cable length 25cm
Professional quality sensors for accurate readings
Designed for the harsh Motorsport environment
2 Pin K-Type thermocouple male connector
Connections
To use the sensors with EVO4 and EVO4S data loggers, you will need a TC yellow 712 4 pin patch lead (metal binder plug) or to use them with an AIM TC Hub or directly to a MyChron4 or MyChron5 kart lap timer/dash logger, you will need a TC yellow 712 3 pin patch lead (metal binder plug).
MXS, MXG, MXP, MXL2 and EVO5 will require a TC - TC yellow patch lead. To connect the thermocouples to these Aim dash/loggers, you need to use the dedicated harness supplied with your device.
Technical
- Temperature working range: 0-1000°C
- Cable sensor length: 25cm
- Cable Type: Compensated
- Two pin male thermocouple connection
- K Type thermocouple
