AiM Exhaust Gas Thermocouple Temperature Sensor M5 K Type Kart
Descrizione
The AiM Exhaust Gas Temperature Sensor (EGT) can measure the exhaust gas temperature by being placed in the exhaust header pipe. This sensor comes with a TC Yellow - 712 3 pin patch lead 1.5m.
Key Features :
| Measure exhaust gas temperature | Thermocouple male fitting |
| Wide temperature range | TC Yellow-712 3 pin patch lead |
AiM Exhaust Gas Thermocouple Temperature Sensor M5 K Type
The AiM K Type thermocouple temperature sensor is fitted with a two pins male thermocouple connection.
It can measure the exhaust gas temperature by being placed in the exhaust header pipe around 150mm from the exhaust pipe.
This sensor also comes with a TC Yellow - 712 3 pin patch lead 1.5m in length.
Temperature range of 0-1000°C
Sensor cable length 25cm
Professional quality sensors for accurate readings
Designed for the harsh Motorsport environment
2 Pin K-Type thermocouple male connector
Connections
MyChron4/5 S 2T Sensors are connected to the dash using the single patch lead (supplied with the dash), which splits into 2. Spare sensors are advisable to have as a spare or to have fitted to a 2nd race engine.
To use the sensors with an AiM MyChron expansion or EVO4 and EVO4S data loggers, you will need a 712 four-pin patch lead or to use them with an AIM TC Hub or directly to a MyChron4 or MyChron5 kart lap timer/dash logger. You will need a 712 three-pin patch lead.
Dettagli prodotto
Prodotti similari
